The Mobility Center 800-708-6399

Threshold Ramps

Ez_Access_Aluminum_Threshold_Ramp | 800-708-6399

Aluminum Threshold Ramp
Available in 1, 1½, 2, 3, 4, 5, & 6 inch heights

Threshold is a lightweight yet portable wheelchair ramp designed for doorways, sliding glass doors, and raised landings. Threshold ramps may be used either one by itself or two combined to make entry and/or exit convenient and safe. Simply measure the height of the door entry and choose the correct size. Manufactured using high-strength aluminum (will not rust or corrode) and features an extruded non-skid driving surface. Easy installation. Supports up to 600 pounds and features a 3-year limited warranty. Made in the USA.

 

SPECIFICATIONSTHRESH
1
THRESH
1.5
THRESH
2
THRESH
3
THRESH
4
THRESH
5
THRESH
6
Made of aluminum
Non-skid surface
Modular Design
Usable size ( H x L x W )1"x 6½"x34"1½"x 9½"x34"2"x12"x34"3"x17"x34"4"x22¼"x34"5"x27½"x34"6"x32¾"x34"
Weight ( lbs.)*358111520
Weight capacity ( lbs.)600600600600600600600
For wheelchairs & scooters
Usage guidelines **¾" - 1¼" rise   1¼" - 1¾" rise   1¾" - 2¼" rise   2¾" - 3¼" rise   3¾" - 4¼" rise   4¾" - 5¼" rise  5¾" - 6¼" rise

* Weights are approximate and may vary.
** Consult your equipment's owner guide for proper degree of incline. Never exceed its recommendations.

Ez_Access_Ramps/Ez_Access_Rubber_Threshold_Ramp_Beveled_Sides.jpg

Rubber Threshold Ramps with Beveled Sides
Available in 1½” and 2½” inch heights.


Simply place the Rubber Threshold ramp in front of the door to provide a smooth ground-to-sill transition. This slip-resistant ramp is

designed to be used on any surface and can easily be trimmed or notched for a custom fit. Made of 100% recycled materials. Ideal for indoor and outdoor use and can easily be moved to another location if needed. Ramp does not interfere with door tracks, making it ideal for use with sliding glass doors. Usable width is 36” and available in 1½” and 2½” heights.

 

Ez_Access_Rubber_Threshold_Ramp_Beveled_Sides | 800-708-6399

SPECIFICATIONSTHRBE 150-1              THRBE 250-1
Made of 100% recycled rubber         
Non-skid surface
Usable size ( H x L x W )1½"x14"x36"2½"x25"x36"
Overall size ( H x L x W )1½"x14"x40"2½"x 25"x43"
Weight ( lbs.)*1440
Weight capacity ( lbs.)850850
For wheelchairs & scooters
Usage guidelines **1½" rise2½" rise

* Weights are approximate and may vary.
** Consult your equipment's owner guide for proper degree of incline. Never exceed its recommendations.

Ez_Access_Rubber_Threshold_Ramp

Rubber Threshold Ramps
Available in 1½& 2½ inch heights (optional risers also available for greater heights)

The Rubber Threshold ramps are designed for doorways and raised landings. This portable wheelchair ramp simply sits against the doorsill (inside or outside) to provide a smooth ground-to-sill transition and is especially practical for sliding glass doors because it does not interfere with the door track. Made of 100% recycled tires, EZ-ACCESS Rubber Threshold ramps are ADA approved, slip-resistant and designed for years of continued use. Can easily be trimmed for lower heights and widths to fit any entrance or threshold. Standard width is 48" (for wider entrances, simply place 2 ramps side-by-side). The Rubber Threshold ramp is ideal for indoor and outdoor use and because the ramp is fully portable, it provides the ability to move it to another door or location if desired. Optional pair of Rubber Risers can be combined with an additional Rubber Threshold Ramp to create a maximum height of 4¾. Supports up to 850-pounds and features a 1-year limited warranty. Made in the USA.

Ez_Access_Rubber_Threshold_Ramp

 

SPECIFICATIONSTHR 250-1THR RISER 225-1 PR
Made of 100% recycled rubber         √                          
Non-skid surface
Usable size ( H x L x W )2½"x 24"x48"24" x 24" (two each)
Overall size ( H x L x W )2½"x 24"x48"24" x 24" (two each)
Weight ( lbs.)*4023½ per riser (2 each)
Weight capacity ( lbs.)850850
For wheelchairs & scooters
Usage guidelines **2½"***Call customer service for details

* Weights are approximate and may vary.
** Consult your equipment's owner guide for proper degree of incline. Never exceed its recommendations.

***Optional components available to reach heights greater than 2.5". Call for details.

Wheelchair and Scooter Chat Forum

Custom Search